Home > Stave drums >

Mahogany stave snare with copper inlay
Mahogany stave snare with copper inlay


 
Our Price: $1,080.00


Availability:: Usually Ships in 6 to 8 Weeks
Product Code: MHOG-CPR


Drum diameter*:

Drum depth*:

Hardware color*:

Qty:  
Description Additional info
 
The goal with this drum was to make an instrument that sounded great, and had the aesthetics to match.

We started with some beautiful genuine mahogany with some very interesting grain patterns. Mahogany is always an excellent choice for musical instruments, it's an incredibly stable wood, and as we all know, Mahogany's been used heavily in some of the best and most celebrated drums to date. Mahogany provides a warm, woody tone. It does really well in low and medium tunings, has a fat, wet, buttery feel to it... An excellent back beat machine. And tuned up high it becomes bright, articulate and crispy.

To add some subtle visual Intrigue to the drum we inlaid a thin band of chemically patina'd copper in the center of the shell.

The shell is approximately 3/8" thick, enough mass for a powerful and punchy attack, but thin enough to allow for warm, woody undertones, and a buttery smooth stick-feel.

The bearing edges are an inner cut 45-degree chamfer, and the outer cut is a smooth quarter inch roundover. The round over allows for excellent shell to head contact, as well as a nice warm, fat, round tone. Where the two cuts meet there is a mildly sharp Apex that allows for just the right amount of pleasant overtones, and crispy articulation.

The shell is finished on the entire inside of the drum and on the edges with our house Blended mix of waxes and oils, and the outside has three coats of high-quality nitrocellulose lacquer.

This drum features a fairly deep and wide snare bed. this snare bed should prevent all unwanted snare buzz and give the snare wires a nice cushy pillow to sink down into the snare side head.

I really believe that sometimes keeping things simple can make for the best instruments. I hope you agree with us, and if you do, you will love this snare drum as much as we do.

Sam from HHG
Features
    • Internal tone control

    You may or may not have encountered a drum with internal tone control or internal dampening before. I have fond memories of an old 60s supraphonic snare that I had that featured this mechanism.

    If you know what I'm talking about, Skip this paragraph. Basically, internal tone control is a small mechanism on the inside of the drum that consists of a piece of spring steel, and a circular felt dampening pad. An operation knob is placed on the outside of the drum, this knob turns a threaded Rod which moves the felt dampening pad on or off of the batter head, effectively muffling or dampening the drum to the desired amount.

    The problem with old internal dampening mechanisms was that they had a couple of small details that were overlooked, these small details turned the majority of the drum world against these simple and genius little devices.

    We have done our best to reimagine and improve upon the design of our predecessors, and have reintroduced this feature on all hhg drums including this one.

    You'll notice a small wooden knob above the air vent on this drum, the knob is made from the exact same mahogany board that was used to build this shell, and it bares the hhg initials engraved in it. This wood knob is the operation knob for the internal tone control. By turning it clockwise you advance the large felt dampening pad toward the head. The knob has a positive stop so that you can only back the dampening pad so far away from the head before it stops. This way, you are always only about a quarter of an inch away from a dampened snare drum head.

    The way I personally like to use the dampening system is to hold a drumstick in one hand, making repeated strokes on the drum at a medium to low volume, while slowly turning the dampening knob, I use my ears to listen to the drum and as the dampening is slowly applied.... this allows you to find The Sweet Spot or you have just the right amount of dampening applied without choking the batter head.